DJI Signal Identification Module Messages Protocol Analysis Drone Module
Engineered for ultimate DJI detection, this high-performance module features a 61.44 MSPS sample rate with all data processing handled entirely on-device via FPGA. It offers an impressive DJI detection range of 2km to 20km. For DJI O3, it directly extracts the drone/pilot/home locations, serial number, and model. For DJI O4, it outputs 176 encrypted bytes, which can be decrypted via our server interface to reveal the same critical data. Additionally, the module supports GB42590-2023 and ASTM F3411-22a RID standards, providing a 1km to 5km RID detection range and delivering complete decoder results directly.
Main Feature
· For DJI O3, output drone/pilot/home location, serial, drone model etc.
· For DJI O4, output 176 encrypt bytes, use our server interface to decrypt to drone/pilot/home location, serial etc.
· DJI Detect Range with LNA: 2km-20km
· RID: Support GB42590-2023 / ASTM F3411-22a
· RID Detect Range: 1km-5km
· All processing on device and output the decoder result.
· UDP/TCP/ ttl 3.3v with 115200
· 5V, 3.3W.
· 89mm * 55mm * 18mm
Common commands
|
start
|
Default
|
|
-gain xx
-longi xxxx,
-lati xxxx,
-freq 2.4
-freq 5.8
|
Set gain [10 70]
Set local longtitue
Set local latitutude
Scan 2.4G only
Scann 5.8G only
|
|
example
|
start -gain 60 -longi 121.498,-lati 31.33,
|
|
Change ip
|
-setip xx.xx.xx.xx
|
Case 1: Mavic 3 T (no encryption)
Case 2: Mini 4 Pro (Encrypted)
Our module output 176byte encrypted bytes, use our O4 decrypted server, output as following
Case 3: Mini4 RID broadcasting, received by type-c serial port
Product Tags:
|
|
2km-20km DJI Signal Identification Module Messages Protocol Analysis Drone Module Images
|
